cosmos design

Cracked hand

2010-07-03T12:26:00.000-07:00

Maya lighting

And Zbrush here

Swordfish

2010-04-13T04:03:00.000-07:00

I recently found this plane. I made it 2 years ago.
I made two textures of 1024 px each.

with details like this:

and normal map made via bake:

with details like this

I remember it should not have more than 4000 polys. Here's the result

Pygmalion issue

2009-12-11T04:01:00.000-08:00

I found some time to turn this statue model into a human head. As I mentioned in one of previous entries, there were no budget of polygons or texture so I decided to save the smoothness of UVW-s instead of optimize it on the texture surface for a better covering.

Except for the stone detailes normal map is basically the same used for statue.

Anyway, I optimized a little bit the low poly geometry.

and here it is:

C statue advanced

2009-09-23T07:35:00.001-07:00

I decided to go further on this model and to create a normal map. First of all I had to clean up geometry and UVW a little bit.

Then I made some details in zbrush.

And the result:

But I'm thinking of making making it human and put some skin on it.

C statue

2009-05-05T00:20:00.000-07:00

At this statue I am working right now. We do not have budget of polygons or texture (the objects are not going to be sent into a game) so there is no specific problems. There are few requierements regarding the quality and crearness of textures. Actually there is no any detailled needed. Anyway I decided to make it as it would.

56ChevyPickup

2009-05-04T23:35:00.000-07:00

This object was entirely modeled and textured by me. I made a high poly object and a bake with it for normal map. That is why it is easy to take this as high polly object; but at a closer look at the profile one could see that it is actualy a low poly.

Latin baroque building

2009-05-04T23:21:00.000-07:00

The special thing about this building is the system of tiling wall texture. I remember that the requirements for that particular building were that:

all the brown gap should be kept as they were in concept art;

not be modeled but made only by texture; everything should be made with the fewest and the smallest possible textures.

I had a wall of about 10, 70 meters and with the technique of advanced tiling I managed to cover it with only 8 meters (1024 pixels) and keeep the rule of 128 texture pixels /1 meter of geometry.

So instead of having 5 textures for this building I reduced them to 4.
1. this-the wall texture (1024/1024),

2. the building parts texture (1024/1024),

3. here is the third roof paviment (512/512),

4. and the alpha one (256/256),

Of corse, with normal and specular map:

House for Black Rock

2009-05-04T01:04:00.000-07:00

The first challenge for this bulding was that the texture dimensions were 2048/2048 pixels and two objects, two houses assigned. The good part for that strategy is the diversity of detailes contained in and no repetition texture ptoblem. The bad thing was the hard way of changing in progress, getting more detailes after starting. There would be no room for other detailes and if one would want to modify some parts of one building that would affect automatically the other building and a lot of extra work would be needed.

The second chalenge was the wood wall. This house is about 8.80 m hight. We were working under a common rule of no less than 128 pixels texture allocation for 1 meter on the geometry. So there would be a space of at least 512 pixels needed for such a wall. But there won't be space for other detailes. So I used a waist that surrounded the house in order to tesselate the geometry and to use a smaller part of texture. The waist hide exterior striations wall tiling texture. It was the house's waist that prevent the repetion of base texture dirt; I tesselated the wall under the waist and moved aside the UVW choordonates so that repetition is not noticeable. I does not matter if the actual wall cut is a seam because the waist covers it well.

But the problem was not solvet yet. There were another 5.8 meters wall geometry upper the waist that should be assigned by these 4 meters (512 pixels) of texture. It was the dirt moisture that had to be kept for the sick of diversity. So there was no way to make a realistic simple tiling with this image. I solved this by putted a tiling part inside and connect it so to avoit the seam. In the image bellow I darkened that tiling spots just to be perceviable (in real texture they are not noticeable).

The same thing I have at the roof, only ths time the problem were different. In order to catch the detailes of roof edge (marked with red) I had to tesselate the smaller roof surface. If I wouldn't have done it than the smaller roof would look too detailed because becouse it meassured only less than 3 meters and not 4 like the bigger one. So this time I had to make the tiling spots inside texture in order to get rid by 1 meter extra texture but to keep the upper and downer roof edge.

Industrial building

2009-05-04T01:01:00.001-07:00

I modeled (Maya) and textured (Photoshop) these objects.

Small interior furniture

2009-05-04T00:54:00.000-07:00

I modeled (Maya) and textured (Photoshop) this object. It has alpha (transparency) for glass and, of course two surfaces for interior and exterior.

Mask for sailing ship

2009-05-04T00:40:00.000-07:00

This was made for face mask normal map placed on the walls of a sailing ship.

Curtain modeled in Zbrush

2009-05-04T00:34:00.000-07:00

I was not interesting in diffuse map. this work was just to practice and develop my Zbrush skills

Skull modeled in maya and detailed in Zbrush

2009-05-04T00:18:00.000-07:00

I draw, sculpt and paint since 12 years old. My experience in working with traditional materials developed in High school of Artes and University of Artes is larger than that of electronic. But I will catch up.

Old graphic design works

2009-05-04T00:04:00.000-07:00

This one is made in 2011 with Adobe Photoshop and Adobe Illustrator .

Untill 2007 I have done DTP and 2D graphic design in aplications like Adobe Photoshop and Corel Draw